Payment Type:L/C,T/T,D/P,D/A,Paypal,Money Gram,Western Union,D/A
Incoterm:FOB,CFR,CIF,EXW,FAS,FCA,CPT,CIP,DEQ,DDP,DDU,DAF,DES
Transportation:Ocean,Land
Port:Shanghai
$100-1000 /Set/Sets
Brand: JSHG
Height: Customized
Surface Treatment: Hot dip galvanized
Butt Diameter: customized
Tip Diameter: Customized
Material: Hot roll steel Q235, Q345, Q420, Q460, Gr.50, Gr.65, SS400, etc.
Brand: JSHG
Thickness: 2mm-30mm
Place Of Origion: China
Transportation: Ocean,Land
Place of Origin: China
HS Code: 7308900000
Port: Shanghai
Payment Type: L/C,T/T,D/P,D/A,Paypal,Money Gram,Western Union,D/A
Incoterm: FOB,CFR,CIF,EXW,FAS,FCA,CPT,CIP,DEQ,DDP,DDU,DAF,DES
1. Pole shaft: The main vertical component of the Electric Pole, typically made of steel or concrete.
2. Crossarm: The horizontal component of the pole that supports the insulators and conductors.
3. Insulators: Devices that support and electrically isolate the conductors from the pole.
4. Hardware: Various bolts, nuts, and fasteners used to assemble the different components of the pole.
5. Grounding rod: A metal rod installed at the base of the pole to provide a path for electrical current to safely dissipate into the ground.
6. Climbing steps: Steps attached to the pole to allow workers to safely climb up and down for maintenance and repair.
7. Lighting fixtures: Optional fixtures that can be installed on the pole for additional lighting in the area.
8. Safety signs: Signs attached to the pole to warn of electrical hazards and provide important information for workers and the public.
9. Base plate: The plate at the bottom of the pole that anchors it to the ground and provides stability.
10. Paint or coating: A protective layer applied to the pole to prevent corrosion and extend its lifespan.
The specifications are as follows:
| Type | Electric poles octagonal electric pole parts for projects |
| Shape | Octanganal,conical,polygonal,round,or columniform |
| Material | Hot roll steel |
| Power | Normally 10-500KV |
| Design Load in Kg | 300~ 1000 Kg |
| Surface treatment | Hot dip galvanization |
| Joint of Poles | Insert mode ,inner flange mode ,face to face joint mode . |
| Wind Speed | 160 Km/Hour . 30 m /s |
| Thickness | 2 mm to 30 mm |
| Welding | We has past flaw testing.Internal and external double welding makes the welding beautiful in shape |
Contact Now